Bar Chair

Kinwey Individual Bar Chairs are used to support wide-spaced light steel in slab/deck construction. Available in 3/4”, 1”, 1-1/2”, and 1-3/4” heights.

Bar Chair

High Chairs for Metal Decking
Kinwey High Chairs for Metal Decking are made with different length legs to fit design of a metal deck. Other information same as individual high chairs.

Bar Chair

Individual High Chairs
Kinwey Individual High Chairs are designed to support upper slab steel from mat steel. It also may be used on fill to obtain leg bearing. Made to order in heights from 2” to 20”. Height is from underside of cross bars to seat for reinforcing bar at top of chair. Also available with plastic tip or epoxy coated.

Bar Chair

Special High Chairs
Kinwey Special High Chairs are used for supporting upper slab/deck steel directly or by means of a carrier bar. When heights exceed 12”, legs are reinforced with welded crosswires or encircling wire. Available in 2” to 20” heights.

Bar Chair

Individual High Chair with Plate
Kinwey Individual High Chair with Plate is used for supporting lower slab steel on fill or other soft material. Details are same as for individual high chairs with the addition of two bearing plates.

Bar Chair